The ST series Tree Shear is available in 2 versions. The ST 200 for excavators 5 to 9T, and ST 250 for excavators up to 11T.
These tree shears are suitable for cutting and handling trees, branches on river banks and in forests. They are also ideal for maintaining forestry parks, felling of garden trees. For clearing operations and for cutting biomass trees.
(Heavy duty forestry shears for excavators 9 – 35T can be found here – click here.)
High Cutting Power
Our excavator tree shear has a single ram system, delivering a 26.5T push to the blade. Making the most of the Hardox and its cutting power.
With two claws on each side and a fixed but replaceable Hardox blade, it has been designed to cut a tree at its base, with very close proximatity to the ground. The ST 200 is capable of cutting 20 cm in diameter and the ST 250, 25cm.
Reinforced Steel Claws
The double claws on each side of the energy cutters are another winning point. Delivering increased stability, and therefore safety, when handling trees or branches immediately after cutting. The claws of the grabs are reinforced with extra steel to avoid bending and twisting.
As a result our tree shears are an efficient, fast and cost effective tool. Used for first thinning, site management, embankment clearing and more.
A bracket can be supplied either with the standard mounting plate sitting at a 90° angle or mounted at the top of the tree shear (R version). The standard bracket can be combined with a piston rotator. This is the perfect solution for all operators wanting to also use the tree shear as a pruner.
With the rotor the tree sheer can rotate allowing cuts at 360°. The piston rotator range is fit for any application where it is necessary to lift and turn in axial and radial charge.
If you would like to discuss your needs with us, for more info or for an informal chat give us a call on 01524 242414 or use the link below