Mulcher Flail Mower Heads

For any model of excavator from 1,2 to 16 tonne

(JCB, Takeuchi, Kubota, Cat, Bobcat, New Holland, Neuson, Komatsu, Hitachi, Case, Yanmar… and more )

trincia

We specialize in the design and development of mulcher flail heads with high perfomance hammers and knives. They are suitable for clearing hedgerows, brambles, grass and branches. Ideal for cleaning canals, shores or for the simple grounkeeping of parks or gardens in general. The reversible mulcher flail heads are symmetrical with the same inlet and output, to allow cutting in both directions adapting to the rotation of the excavator for a continuous cut in any conditions. Forestry flail mower heads for excavators from 8,0 to 16 tonnes are fitted with a very strong frame ideal for heavy duty  andworking in an oblique position. All models can be fitted with hammer blades, suitable for cutting bushes and woody vegetation up to a diameter of 5 inches.

Flail mower LS 30.5N

Suitable for any excavators from 1.2 to 16 tonnes, fitted with priority flow control valve.

WATCH THE VIDEO HERE

FLAIL MOWER HEAD MODELS

MODEL MACHINE WEIGHT CUTTING WIDTH  OIL MIN L/MIN TRANSMISSION BAR
LS1-2 1,5 – 3 600 – 800 20 – 50 Direct 200
LS TE-LT 2 – 6 600 – 800 – 1000 17 – 35 – 50 Direct 200 – 220
LS 30.3 TTD 5 – 8 1000 – 1200 50 – 65 – 80 Direct 200 – 220
LS 30.5N TTC 6 – 12 1200 50 – 70 – 80 Belt 200 – 220
LS TE-REV 2,5 – 12 600 – 800 – 1000 20 – 40 – 50 – 60 Belt 200 – 220
LS TE-P REV 8 – 16 1000 – 1200 50 – 70 – 80 – 100 Belt 200 – 220
Flail mower LS 30.3N