Flail mower range

Robustrack Mulcher LS7-1300

Hydraulic flail mowers, mulchers and hedgecutters for excavators from 1.2 to 25 Ton.

We specialise in the distribution of flail mowers with high performance blades for both forestry and standard applications. They are suitable for cutting hedges, brambles, grass and branches. Ideal for clearing canals, river banks, trees and vegetation from railway banks, maintaining woods and ground clearance in general.

Y BLADE ROTOR
Y SHAPE BLADES
Boot blades small
BOOT BLADES

HAMMER BLADES
HAMMER BLADES
FORESTRY ROTOR
FORESTRY ROTOR

FORESTRY FIXED TEETH ROTOR
FORESTRY FIXED TEETH ROTOR

We have a wide range of mulchers both standard and reversible: the mulchers with standard setup come fitted with a rear roller that can be adjusted in three different positions. This means that the distance between the cutting level and the ground can be increased to avoid debris or foreign objects, or decreased to have a very close cut.

The reversible mulchers come without a roller, so that the operator is able  to cut in both directions.  This means shorter cutting time with increased productivity, especially when operating on the side of the road, where limited interference with traffic is crucial.

 Cutting Direction                          Cutting Direction - REV

All models are fitted with an anti-cavitation flow control valve: this block of valves deals with the back pressure that might be generated by a sudden stop of the rotor of the hedgecutter. The block of valves releases the excess pressure and avoids potential damage to the seal of the hydraulic motor. A third pipe free flowing directly to the oil tank can be installed as an extra precaution.

Robustrack Mulcher LS block of valve

Every flail mower can be supplied with standard mounting bracket (2 pins) to fit directly onto the boom of the excavator or with quick hitch mounting bracket with or without pins.

flail mower head mounting bracket
2 PIN MOUNTING BRACKET
FLOTATION MOUNTING BRACKET